This is the multi-page printable view of this section. Click here to print.

Return to the regular view of this page.

Community

Stroom is an open source application whose evolution is enhanced by the community of users and developers that contribute content and development effort. This section provides the resources for this community, to help with producing content, making changes to Stroom and enhancing this documentation.

1 - Roadmap

The roadmap for new features and changes to the Stroom family of products.

v7.0

Reference data storage

Reference data uses a memory-mapped disk-based store rather than direct memory to reduce the memory overhead associated with storing reference data.

Search result storage

Search results are stored on disk rather than in memory during creation to reduce the memory overhead incurred by search.

Modularisation

Separation of Stroom components into discreet modules that have clear APIs and separate persistence where required to reduce coupling.

Modernisation of libraries

Changing Stroom libraries to replace Spring with Guice and Hibernate with JOOQ.

Annotations

Search results in dashboards can be annotated to provide status and notes relating to the result item, e.g. an event. These annotations can later be searched to see which events have annotations associated with them.

v7.1

Elastic search integration

Elastic search can be used for indexing data. Data can be sent to an elastic index via a pipeline element and an elastic index can be queried from a Stroom dashboard.

Interactive Visualisations

Selecting or manipulating parts of visualisations can be used to trigger further queries to zoom in or select specific data etc.

Improved Proxy Aggregation

Proxy aggregation can better match user defined aggregate sizes and forward to multiple destinations.

User Preferences

The UI can be customised to meet the needs of an end user including theme (dark mode), date and time format, font, layout.

v7.2

XSLT 3

Add support for XSLT 3.

Accessibility Improvements

Refactoring some elements of the UI to improve accessibility.

v8+

Authorisation enhancements

The Stroom authorisation system is split out into a separate service and provides integration with external authorisation mechanisms.

Proxy processing

Stroom proxy is capable of pipeline processing in the same way as a full Stroom application. Pipeline configuration content can be pushed to proxies so that they can perform local processing prior to sending data to Stroom.

Multiple input sources

Stroom is capable of processing data from a Kafka topic, HDFS, the local file system, HTTP POST in addition to the included stream store.

Multiple output destinations

Stroom has improved support for writing to various destinations such as Kafka, HDFS, etc. Improvements include compression and meta data wrapping for future import.

Improved field extraction

Enhancements to data splitter and associated UI to make the process of extracting field data from raw content much easier.

Kafka analytics

Stroom exposes the use of Apache Kafka Streams for performing certain complex analytics.

Query fusion

Stroom allows multiple data sources to be queried at the same time and the results of the queries to be fused. This might be for fusing data from multiple search indexes, e.g. events and annotations, or to effectively decorate results with additional data at search time.

Reference data deltas

Reference data is enhanced to cope with changes (additions and removals) of state information rather than always relying on complete snapshots.

2 - Developer Guide

This section is intended for developers contributing to the development of the Stroom software (and its related applications). It describes how to do some common tasks, such as releasing and building documentation. It also covers the development of any supporting scripts or utilities for running/administering Stroom, e.g. Ansible playbooks, Helm charts, etc.

2.1 - Software Stack

The software stack used by the Stroom family of products.

Stroom and Stroom Proxy

Stroom and Stroom Proxy live in the same repository, share some common code and are built by the same Gradle build.

Languages and key frameworks

  • Java 15 - The language for the core application
    • Dropwizard - A RESTful framework incorporating embedded Jetty.
    • Junit 5
    • SLF4j and Logback
    • Mockito
    • Jooq - Generates Java code for type safe SQL.
    • Apache Lucene - The search library used by Stroom’s indexes and dashboard queries.
    • Lightning Memory Mapped Database - Used for memory mapped persistent reference and search data stores.
  • React - Some of the new UI screens.
    • Typescript

Build and development tools

  • Gradle - Building the java application and orcestrating related sub-builds, e.g. npm.
  • Github Actions - The CI build and release.
  • Bash - Various utility shell scripts.
  • Docker - Building the stroom and stroom-proxy docker images.
  • Docker Compose -
  • Docker containers - Provide consistent build environments for
    • Java
    • npm
    • Plant UML
  • npm - For the build of the new React based UI screens.

Services

  • Nginx - Used for SSL termination, load balancing and reverse proxying.
  • MySQL - Database for persistence in Stroom.

2.2 - Running Stroom in an IDE

How to run Stroom in an Integrated Development Environment, e.g. IntelliJ

We tend to use IntelliJ as our Java IDE of choice. This is a guide for running Stroom in IntelliJ for the purposes of developing/debugging Stroom.

Prerequisites

In order to build/run/debug Stroom you will need the following:

  • OpenJDK 15
  • Git
  • Gradle
  • IntelliJ
  • Docker CE
  • Docker Compose

These instructions assume that all servcies will either run in the IDE or in Docker containers.

We develop on Linux so if you are running on a Mac you may experience issues with some of our shell scripts. For running the various shell scripts in our repositories you are advised to install

  • bash 4+
  • jq
  • GNU grep
  • GNU sed

Stroom git repositories

To develop Stroom you will need to clone/fork multiple git repositories. To quickly clone all of the Stroom repositories you can use the helper script described in stroom-resource .

Database setup

Stroom requires a MySQL database to run. You can either point stroom at a local MySQL server or use the MySQL Docker container from stroom-resources.

MySQL in a Docker container

See the section below on stroom-resources.

Host based MySQL server

With an instance of MySQL server 8.0 running on your local machine do the following to create the stroom database:

# log into your MySQL server using your root credentials
mysql --user=root --password=myrootpassword

Then run the following commands in the MySQL shell:

drop database stroom;
create database stroom;
grant all privileges on stroom.* to stroomuser@localhost identified by 'stroompassword1';
quit;

Local configuration file

When running stroom in an IDE you need to have a local configuration file to allow you to change settings locally without affecting the repository. The local configuration file live in the root of the Stroom repository ./local.yml.

To create a default version of this file run this script from within the root of the stroom git repository.

./local.yml.sh

This will create ./local.yml using stroom-app/dev.yml as a template. So that you can run a multi-node cluster it will also create ./local2.yml and ./local3.yml as well. These files are not source controlled so you can make any changes you like to them, e.g. setting log levels or altering stroom property property values values.

stroom-resources

As a minimum to develop stroom you will need clones of the stroom and stroom-resources git repositories. stroom-resources provides the docker-compose configuration for running the many docker containers needed.

Having cloned stroom-resources navigate to the directory stroom-resources/bin and run the script

./bounceIt.sh -y

On first run this will create a default version of the git-ignored file stroom-resources/bin/local.env which is intended for use by developers to configure the docker stacks to run.

This file is used to set a number of environment variables that docker compose will use to configure the various containers. The key variable in there is SERVICE_LIST. This is a bash array that sets the services to run. By default it is set to run stroom-all-dbs (MySQL + database init scripts) and nginx which are sufficient for running Stroom in an IDE.

Verify the Gradle build

Before trying to run Stroom in an IDE it is worth performing a Gradle build to verify the code compiles and all dependencies are present. This command will run all parts of the build except for the tests which can take 20+mins to run. Some parts of the build are run inside docker containers (to remove the need to install additional dependencies) so on first run there will be an overhead of building the docker image layers. These layers will be cached which will speed up future builds.

./gradlew clean build -x test

Local or embedded MySQL

The Junit integration tests that need a database can either be run against the local MySQL (i.e. stroom-all-dbs) or an embedded MySQL instance.

Configuring the database used can be done with the JVM argument -DuseEmbeddedMySql=false, which can be set in Run/Debug Configurations => Edit configuration templates… => JUnit => VM options in Intellij. False will use your local MySQL instance, true with use the embedded one. The CI build uses the embedded MySQL.

The pros/cons of using the embedded instance are:

Pros

  • No dependency on stroom-resources to run the full build.

Cons

  • Requires the MySQL binaries to be downloaded, sometimes multiple times.
  • Consumes a lot of disk space if multiple instances are run.
  • Harder to debug tests as the database is destroyed at the end of the test.

Clearing down your environment

If you need to work from a clean slate and you are using the container based MySQL you can run the following:

pwd
(out)/home/dev/git_work/stroom-resources/bin
(out)
./clean.sh \
&& rm -rf ~/tmp/stroom \
&& rm -rf /tmp/stroom \
&& rm -rf ~/.stroom/volumes \
&& rm -rf ~/.stroom/temp \
&& rm -rf ~/.stroom/logs \
&& rm -rf ~/.stroom/v7

Sample Data

When developing Stroom it is helpful to have Stroom run with pre-loaded content and data as by default it will be completely empty. SetupSampleData.java is a class that loads pre-defined content and data into the database and file system so that Stroom can begin processing data on boot. This sample data/content is very useful for manually testing and exercising the application in development. This class assumes that the database being used for Stroom is completely empty.

To run SetupSampleData use the pre-defined Run Configuration in IntelliJ called SetupSampleData. This will load content (e.g. XSLTs, Pipelines, etc.), create Feeds and load data into the Feeds.

You should now have a database and stream store populated with tables and data, providing you with some predefined feeds, data, translations, pipelines, dashboards, etc.

When Stroom is next started it will begin to process the data using the pre-defined pipelines.

Running Stroom from the IDE

The user interface for Stroom is built using GWT (see GWT Project for more information or GWT specific documentation). As a result Stroom needs to be started up with GWT Super Dev Mode. Super Dev Mode handles the on-the-fly compilation of the Java user interface source into JavaScript and the source map that links client JavaScript back to Java source for client side debugging.

The following steps for running and debugging Stroom in IDEA assume you have a MySQL database running on localhost:3307, with a database stroom and user stroomuser already created.

JAVA_HOME

Ensure environment variable JAVA_HOME is set and points to a valid JDK 15 directory

export JAVA_HOME=~/.jdks/openjdk-15.0.2

Alternatively to simplify the process of installing and managing Java JDKs consider using SDKMan .

Build stroom-app

NOTE: During development, it is helpful to skip running unit and integration tests, to speed up the build process:

./gradlew clean build -x test

Start a single Stroom node

  1. Select the IDEA run configuration named Stroom GWT SuperDevMode
  2. Click Debug. Stroom will start, with log output displayed in the Run pane at the bottom of the window.

This run configuration essentially sets the JVM argument -DgwtSuperDevMode=true to run the application in Super Dev Mode.

Watch the log output. Once you see a log INFO message containing the text “Started”, you will be able to launch the app in a browser from: https://localhost.

You will see the Stroom blue background, with a username/password prompt. Enter the following default credentials:

  • Username: admin
  • Password: admin

You can now interact with Stroom and set breakpoints in Java code. Note that setting breakpoints in any of the java code in modules suffixed with -client (i.e. client side GWT Java code) does not have any effect, as these components are compiled to static JavaScript. Breakpoints in modules ending -shared will only have an effect if you are debugging server side code.

Starting the Super Dev Mode Compiler

With the Stroom application running you need to also run a draft GWT compile and run the Super Dev Mode compiler.

On first use it is recomended to run:

./gradlew gwtClean :stroom-app-gwt:gwtDraftCompile :stroom-app-gwt:gwtSuperDevMode

This will ensure a clean state of the GWT compiled javascript. It may be necessary to re-run the clean, and draft compile if there have been significant changes to the Java code or if there are problems running Stroom in Super Dev Mode.

Normally however you can just run:

./gradlew :stroom-app-gwt:gwtSuperDevMode

When this gradle task runs it will echo some instructions for how to set up your browser. Once the browser is all set up with the dev mode favorites you can visit Stroom at

  • http://localhost:8080 (bypassing Nginx)
  • https//localhost (via Nginx)

Running without Nginx is simpler but can hide problems with the Stroom/Nginx configuration/integration.

Authentication

In development you can either run Stroom with authentication on or off. It is a quicker development experience with authentication turned off but this can hide any problems with authentication flow.

To run Stroom with authentication turned off set the following in local.yml:

stroom:
  security:
    authentication:
      authenticationRequired: false

If you want to run with authentication but don’t want to be prompted to change the password on first boot you can set:

stroom:
  security:
    identity:
      passwordPolicy:
        forcePasswordChangeOnFirstLogin: false

Alternatively you can run the IntelliJ Run Configuration Stroom Reset Admin Password, which will reset the password to admin and prevent further prompts to change it.

Right click behaviour

Stroom overrides the default right click behaviour in the browser with its own context menu. For UI development it is often required to have access to the browser’s context menu for example to inspect elements. To enable the browser’s context menu you need to ensure this is property is set to null in dev.yml:

stroom:
  ui:
    oncontextmenu: null

To return it to its defualt value, set it to "return false;".

Hot loading GWT UI code changes

If you make any changes to the Java code in -client or -shared modules then in order for them to be hot loaded into the Javascript code you simply need to refresh the brower. This will trigger Super Dev Mode to recompile any changed code.

If you have make significant code changes, e.g. moving/renaming classes then GWT can get confused so you may need to run the gwtDraftCompile and/or gwtClean gradle tasks followed by gwtSuperDevMode.

Debugging GWT UI code

To debug the GWT UI code you will need to use Chrome Dev Tools (shift-ctrl-I). Setting breakpoints in the UI code in IntelliJ will have no effect. SuperDevMode creates source maps that link the running javascript back to Java code that you can set break points in.

To find the Java source in Chrome Dev Tools open the Sources tab then in the left hand navigator pane (Page tab) select:

Top => ui => stroom (ui) => 127.0.0.1:9876 => sourcemaps/stroom => stroom

This folder then contains all the stroom java packages.

2.3 - Components

Stroom is broken down into separate components. Each component encapsulates a specific area of Stroom functionality and aids development by providing a single area of focus for new features and ensures separate components remain as loosely coupled as possible. Components can be tested in isolation and their interaction with other components easily understood by only allowing dependencies via minimal APIs.

Some examples of components in Stroom include

  • stroom-activity - Component for recording a users actions against a current activity
  • stroom-dictionary - Component for storing lists of words.
  • stroom-statistics - Component for recording statistical data, e.g. amount of data received in X minutes.

In the project structure a component appears as a first level subdirectory of the root project folder. Components have further subdirectories (modules) that make up the various parts of the component, e.g.

  • stroom - Root project
    • stroom-activity - The component
      • stroom-activity-api - API module for stroom-activity
      • stroom-activity-impl - Implementation of the API and other module implementation code
      • stroom-activity-impl-db - Database persistence implementation used by impl
      • stroom-activity-impl-db-jooq - JOOQ generated classes used by stroom-activity-impl-db
      • stroom-activity-mock - Mock implementation for the stroom-activity API

Dependencies between a modules components

The diagram below shows the dependencies between the different modules that make up a component as well as the internal dependencies within the impl module. The actual implementations used at runtime are determined by Guice bindings in whichever Guice modules are loaded by the application. Tests can bind mock implementations of a components API just by using the Guice module within the mock module.

images/dev-guide/module-dependencies.puml.svg

Internal Component Dependencies

Dependencies between components

Typically a component will need to call out to other components to apply security constraints and to log user activity. These typical relationships are shown in the diagram below.

images/dev-guide/external-dependencies.puml.svg

External Component Dependencies

Component API, e.g. modules ending in -api

API layer

All communication between components in stroom must be made via a component’s API. The API provides the minimum surface area for communication between components and decouples dependencies between components to just the API code. For component testing purposes mock implementations of these APIs can be used to limit testing to just a single component.

Component API and service implementation, e.g. modules ending in -impl

Client interaction - REST services and GWT Action Handlers

The uppermost layer of the server side code services requests from the client. The client may make restful calls as is the case for the new UI or will use Actions that are handles with ActionHandlers as is the case for the legacy GWT UI.

Since this layer deals with all client interaction it should be responsible for creating audit logs for all user activity, e.g. accessing documents, searching etc. No audit logging should need to be performed at a lower level within the application as deeper levels have less knowledge of user intent since they may just be playing a part in the wider request.

The client interaction layer adds no logic and asks the underlying service layer to service the encapsulated request away from the REST endpoint wrapping code or GWT action handler code. This allows multiple types of endpoint to use the same underlying service layer. If a request requires the use of multiple services to form a response, this must be handled within the service layer by the primary service which will be responsible for any such orchestration.

Service layer

The service layer applies permission constraints to any requests being made so that only calls from identified and permitted users are allowed to proceed. The service layer performs all orchestration and business logic, and is responsible for all mutations of objects that will be persisted by the underlying persistence layer such as stamping objects to be updated with the current user and update time.

The service layer provides implementations for any API that the component may have.

The service layer provides the DAO (Data Access Object) API for the persistence layer to implement but maintains no knowledge of underlying persistence implementation, e.g. database queries.

Persistence implementation, e.g. modules ending in -impl-db

Persistence layer - DAOs

The persistence layer is an implementation of one or more DAOs specified in the service layer. The persistence layer provides no logic, it just stores and retrieves objects in a database or other persistence technology. If serialisation/de-serialisation is required in order to persist the object then that should also be performed by this layer so that no code above this layer has to care about this implementation detail.

The persistence layer does not apply security or permissions checking so should not need to reference the security API.

2.4 - Contributing

How to make contributions to the Stroom GitHub repositories.

2.5 - Release Process

How to release new versions of the software.

2.5.1 - Releasing Stroom

How to release a new version of Stroom

Pre-requisites for a release

The follow need to be completed before a release is made.

Logging changes

Stroom and its related repositories all have a CHANGELOG.md file for recording changes made between releases. Before making a release you should ensure that all changes have been recorded in the CHANGELOG. This is not done by directly editing the file but instead using the script ./log_change.sh.

log_change creates change entry files in the directory ./unreleased_changes/. This prevents merge conflicts that would happen with multiple people editing the CHANGELOG file.

The following examples show you how to use the log_change script.

# Log a change for the issue number in your current branch (e.g. branch: gh-1234-fix-dead-locks)
./log_change auto "Fix database dead locks during purge job"
(out)
# Log a change for the issue number in your current branch (e.g. branch: gh-1234-fix-dead-locks)
# Your default editor will open the created skeleton change file
./log_change auto
(out)
# Log a change with no associated issue
./log_change 0 "Fix typo on about screen"
(out)
# Log a change for issue #1234
./log_change 1234 "Fix database dead locks during purge job"
(out)
# Log a change for issue #1234
# Your default editor will open the created skeleton change file
./log_change 1234
(out)
# Log a change for an issue in a different repository
./log_change gchq/stroom#2424 "Fix database dead locks during purge job"
(out)
# Log a change for an issue in a different repository
# Your default editor will open the created skeleton change file
./log_change gchq/stroom#2424
(out)
# List all unreleased changes
./log_change list

Commit and push all changes

Before releasing all local changes that you want in the release should be committed and pushed. Commits that you want in a release should be merged down to a release branch, e.g. 7.0 or master. Once pushed and merged ensure that the branch passes the CI build .

Decide on the next version number

Stroom versioning follows Semantic Versioning .

Given a version number MAJOR.MINOR.PATCH:

  • MAJOR is incremented when there are major or breaking changes.
  • MINOR is incremented when functionality is added in a backwards compatible manner.
  • PATCH is incremented when bugs are fixed.

Based on the changes since the last release establish if it is a major, minor or patch release to determine the next version number.

Performing a named release of Stroom

Once all the above pre-requisites have been met you can trigger the release by running this command:

./tag_release.sh

This script will do the following:

  • Adds the content of the unreleased change entry files (created by log_change.sh) to the CHANGELOG.
  • Prompts for (and suggests) the next version based on the previous release.
  • Adds a new version heading to CHANGELOG.
  • Adds/updates the version compare links in the CHANGELOG.
  • Commits and pushes the change log changes.
  • Creates an annotated git tag using the release version number and change entries.

The tagged git commit will trigger a CI build that includes additional release elements such as:

  • Pushing the built docker images to DockerHub.
  • Creating a release for the git tag in GitHub with all the release artefacts.
  • Publishing any libraries to Sonatype and Maven Central.

Performing a named release of the docker stacks

Once the Stroom release build has finished and the artefacts are available on GitHub Releases and DockerHub you can create an associated release of the Stroom docker stacks.

In the following examples we will assume that you have just released Stroom v7.0.1 on branch 7.0, and the previous release was v7.0.0.

Checkout and pull the corresponding release branch in the stroom-resources repository.

cd stroom-resources
(out)
git checkout 7.0
(out)
git pull

Now edit the file bin/stack/container_versions.env and edit the following line, setting it to the version of stroom you have just released:

Before

  STROOM_TAG="v7.0.0"

After

  STROOM_TAG="v7.0.1"

If any of the other docker image versions need updating then do it at this point.

Now add/commit/push the change. Check the CI build is successful for the new Stroom image.

If the build is green then tag the stacks release as follows:

pwd
(out)/home/dev/git_work/stroom-resources
(out)
# Clear out any previous build
rm -rf ./bin/stack/build
(out)
./tag_release-stroom-stacks.sh stroom-stacks-v7.0.1

This script will build all the stack variants locally to ensure they will build successfully, though it does not test them. If the local build is successful it will then create an annotated git tag which will trigger a release CI build. The release CI build will create an archive for each stack variant and add them as a release artefacts.

SNAPSHOT releases

SNAPSHOT releases should not be released to Sonatype or Maven Central. If a development version of a library needs to be shared between projects then you can either use the Gradle task publishToMavenLocal to publish a SNAPSHOT version to your local Maven repository and change your dependency version to SNAPSHOT, or perform a named release along the lines of vx.y.z-alpha.n.

Release Versioning conventions

Semantic versioning is used, and this should be adhered to, see SemVer . The following are examples of valid version names

  • SNAPSHOT - Used only for local development, never to be published publicly.
  • v3.3.0 - Initial release of v3.3, with an associated 3.3 branch.
  • v3.3.1 - A patch release to v3.3 on the 3.3 branch.
  • v3.4.0-alpha.1 - An alpha release of v3.4, either on master or a 3.4 branch
  • v3.4.0-beta.1 - An beta release of v3.4, either on master or a 3.4 branch

To Perform a Local Build

# Full build:
./gradlew clean build
(out)
# Build without unit tests
./gradlew clean build -x test
(out)
# Build without any tests or GWT compilation (GWT compilation applies to stroom only)
./gradlew clean build -x test -x gwtCompile

2.6 - Setting up releases to Sonatype & Maven Central

This is a rough guide to what was done to set it up. Some bits may be missing.

Create a Sonatype account

You need to create an account on Sonatype and you will need to raise a jira ticket on Sonatype’s jira to get approved on the uk.gov.gchq group. This will require an existing user approved for the group to approve you on the ticket.

Setting up a GPG key

You can use the following commands for setting up a GPG2 key for signing.

# Generate the GPG2 key
gpg2 --gen-key

# To list all keys
gpg2 --list-keys

# To get the key ID
gpg2  --list-secret-keys | grep "\[SC\]" | tr -s ' ' | cut -d' ' -f2 | cut -d'/' -f2

# To send the public keys to a key server
gpg2 --keyserver hkp://pool.sks-keyservers.net --send-keys <key id>
gpg2 --keyserver hkp://keyserver.ubuntu.com --send-keys <key id>
gpg2 --keyserver hkp://pgp.mit.edu --send-keys <key id>

# To display the secret key in base64 form, for use in GH actions
key="$(gpg2 --armor --export-secret-keys <key id> | base64 -w0)"; \
echo -e "-------\n$key\n-------"; \
key=""

Setting up the gradle build

The signing and release to Sonatype is done by various gradle plugins.

id "io.github.gradle-nexus.publish-plugin" version "1.0.0"
id "signing"
id "maven-publish"

See the root and event-logging-api gradle build files (in the event-logging repo) for an example of how to set up gradle.

The credentials can be passed to the gradle build using special gradle env vars Project Properties (external). The credentials required are:

  • ORG_GRADLE_PROJECT_SIGNINGKEY - The key as produced by the gpg2 --armor command.
  • ORG_GRADLE_PROJECT_SIGNINGPASSWORD - The password for the GPG key.
  • ORG_GRADLE_PROJECT_SONATYPEUSERNAME - The account username on Sonatype.
  • ORG_GRADLE_PROJECT_SONATYPEPASSWORD - The account password on Sonatype.

Setting up Github Actions

You will need to provide Github with the four secrets listed above by setting them as repository secrets at https://github.com/gchq//settings/secrets/actions. For each one create a secret with the ORG_GRADLE_... bit as the name.

So that the action can create the Github release you will also need to set up an SSH key pair and provide it with the public and private key. To generate the key pair do:

ssh-keygen -t rsa -b 4096 -f <repo>_deploy_key

The key pair will be created in ~/.ssh/.

Create a repo deploy key with the public key, named ‘Actions Deploy Key’ and with write access at https://github.com///settings/keys/new. Create a repo secret with the private key, named ‘SSH_DEPLOY_KEY’ at https://github.com///settings/secrets/actions/new.

3 - Developing Content

This section covers the development of shared content within Stroom, e.g. content packs for processing common log file formats or or useful dashboards.

4 - Documenting Stroom

This section covers the development and maintenance of this documentation site. The documentation for Stroom is a community effort with contributions from developers and users.

This site is built using Hugo with the Docsy Hugo theme. The content is pre-dominantly authored in Markdown with some Hugo shortcodes.

4.1 - Building the Documentation

How to develop and build the documentation.

Prerequisites

In order to build and contribute to the documentation you will need the following installed:

Docker or Docker Desktop is required as all the build steps are performed in docker containers to ensure a consistent and known build environment. It also ensures that the local build environment matches that used in GitHub actions.

docker-buildx is a plugin for docker that allows caching of the docker images to speed up the build process. This may be installed by your package manager when you install docker or Docker Desktop, or you may need to install it separately. You can confirm you have buildx by executing the following command which should give you output similar to this:

docker buildx version
(out)github.com/docker/buildx 0.9.1 ed00243a0ce2a0aee75311b06e32d33b44729689

It is possible to build the docs without docker but you would need to install all the other dependencies that are provided in the docker images, e.g. java, plantuml, puppeteer, hugo, npm, html2canvas, jspdf, graphviz etc.

It is assumed that you have a reasonable understanding of how to use Git and Github, specifically:

  • Github
    • Forks
    • Pull requests
  • Git
    • Branching
    • Pulling from upstream remotes

Cloning the stroom-docs git repository

The git repository for this site is stroom-docs (external link). stroom-docs uses the Docsy theme (themes/docsy/) via a Go module so the theme will be pulled in when Hugo is first run.

Unless you are a committer on the gchq/stroom-docs repository, you will need to fork this repository into your own Github account. You can then clone your fork of the repository like so (in this example it is assumed your Github username is jbloggs):

# Clone the repo
git clone https://github.com/jbloggs/stroom-docs.git
(out)Cloning into 'stroom-docs'...
(out)remote: Enumerating objects: 66006, done.
(out)remote: Counting objects: 100% (7916/7916), done.
(out)remote: Compressing objects: 100% (1955/1955), done.
(out)remote: Total 66006 (delta 3984), reused 7417 (delta 3603), pack-reused 58090
(out)Receiving objects: 100% (66006/66006), 286.61 MiB | 7.31 MiB/s, done.
(out)Resolving deltas: 100% (34981/34981), done.

Configuring the fork

You now need to configure the clone of your fork with details of the gchq/stroom-docs upstream, which will allow you to pull changes from it.

git remote add upstream https://github.com/gchq/stroom-docs.git

Checking out the correct branch

There is a version of the documentation for each minor Stroom version (see Stroom Versions.

Before you start editing/viewing the documentation you need to be working from the correct branch of the Git repository. If for example you are adding some content that is applicable to Stroom v7.0 then you need to checkout branch 7.0.

git checkout 7.0

Creating a feature branch

If you are making changes to the documentation then the recommended working practice is to always make changes on a feature branch. A feature branch would typically contain all commits/changes relating to a single feature, e.g. the addition of a new section, or updating the documentation for a specific change in Stroom. Having only these changes on a branch makes it easy to merge them into the release branch (e.g. 7.0) or to just delete the branch if they are no longer needed. A feature branch would typically be merged into the appropriate release branch by creating a pull request in GitHub.

Assuming you have checked out the desired release branch that you would like your changes to ultimately be merged into, do something like the following to create a feature branch (where add-properties-section is the name of your branch):

git checkout -b add-properties-section

This will create the named branch and check it out in one step.

Converting the PlantUML files to SVG

stroom-docs makes used of PlantUML for a lot of its diagrams. These are stored in the repository as .puml text files. In order that they can be rendered in the site they need to be converted into SVGs first.

To convert all .puml files into sibling .puml.svg files do the following:

./container_build/runInPumlDocker.sh SVG

This command will find all .puml files (in content/ and assets/) and convert each one to SVG. It only needs to be run on first clone of the repo or when .puml files are added/changed. The generated .puml.svg files are ignored by git. This command will be run as part of the GitHub Actions automated build.

Running a local server

The documentation can be built and served locally while developing it. To build and serve the site run

./container_build/runInHugoDocker.sh server

This uses Hugo to build the site in memory and then serve it from a local web server. When any source files are changed or added Hugo will detect this and rebuild the site as required, including automatically refreshing the browser page to update the rendered view.

Once the server is running the site is available at localhost:1313.

Building the site locally

To perform a full build of the static site run:

./container_build/runInHugoDocker.sh build

This will generate all the static content and place it in public/.

Generating the PDF

Every page has a Print entire section link that will display a printable view of that section and its children. In addition to this the GitHub Actions we generate a PDF of the docs section and all its children, i.e. all of the documentation (but not News/Releases or Community) in one PDF. This makes the documentation available for offline use.

To test the PDF generation do:

./container_build/runInPupeteerDocker.sh PDF

Updating the Docsy theme

The Docsy theme is a dependency of this Hugo site. See Update the Hugo Docsy Module for details on how to update the version of the Docsy theme.

In those instructions when it says to run a hugo command you need to do it from within the hugo docker container.

./container_build/runInHugoDocker.sh bash

This will give you a bash prompt inside the container that has the hugo binary available. The container has access to your local stroom-docs repository (from where you ran runInHugoDocker.sh) and the initial directory is the root of the repository. Inside the container the root of the repository is mounted as /builder/shared.

To leave the container’s shell type exit.

Alternatively you can run a single command directly, e.g. to update Docsy to 0.6.0 do:

./container_build/runInHugoDocker.sh 'hugo mod get -u github.com/google/docsy@v0.6.0'

4.2 - Managing Stroom Versions

How to manage documentation for different versions of Stroom.

The Docsy theme supports site versioning so that multiple versions of the site/documentation can exist and link between each other. For this documentation site, each version of the site is tied to a minor release of Stroom, e.g. 7.0, 7.1, 7.2, 8.0 etc. Each Stroom version is represented by a git branch with the same name. There is an additional git branch legacy that is for all Stroom versions prior to 7.0 and will be removed once the versions prior to 7.0 are no longer supported. Documentation changes for an as yet unreleased Stroom version would be performed on the master branch.

When the combined site is built, each version will exist within a directory as siblings of each other, i.e.

/         # Latest version content lives here (i.e. copy of v8.0)
/7.0/
/7.1/
/7.2/
/8.0/     # Latest version is also published here but only used by CI build.
/legacy/

The master branch is NOT published to GitHub Pages or included in the release artefacts.

Versioned Site Configuration

To configure each version of the site so that it knows what version it is and what the other versions are you need to edit config.toml. This needs to be done on each branch in a way that is appropriate to each branch. If a change needs to be applied to all branches then it is best to make it in the oldest branch for which the documentation is published, and then merge the changes the changes up the chain, e.g. legacy => 7.0 => 7.1 => 7.2 => 8.0 => master.

The following config properties needed to be amended on each branch. This example is from the 7.1 branch and is based on there being versions legacy, 7.0 and 7.1, with 7.1 being the latest.

7.0

[params]
  # Menu title if your navbar has a versions selector
  # to access old versions of your site.
  version_menu = "Stroom Version (7.0)"

  # If true, displays a banner on each page warning that
  # it is an old version. Set this to true on each git branch
  # of stroom-docs that is not the latest release branch
  archived_version = true

  # Used in the banner on each archived page.
  # Must match the value in brackets in "version_menu" above
  version = "7.0"

  # A link to latest version of the docs. Used in the
  # "version-banner" partial to point people to the main
  # doc site. Ignored for the latest version
  url_latest_version = "/../"

  # The version number of the latest version. Used in the
  # "version-banner" partial to tell people what the latest
  # version is. Ignored for the latest version
  latest_version = "7.1"

  # The name of the github branch that this version of the
  # documentation lives on. Used for the github links in the
  # top of the right hand sidebar. Should match the last part
  # of url_latest_version.
  github_branch = "7.0"

  # A set of all the versions that are available.
  [[params.versions]]
    version = "7.1 (Latest)"
    url = "/../"
  [[params.versions]]
    version = "7.0"
    url = "/../7.0"
  [[params.versions]]
    version = "Legacy"
    url = "/../legacy"

7.1

[params]
  # Menu title if your navbar has a versions selector
  # to access old versions of your site.
  version_menu = "Stroom Version (7.1)"

  # If true, displays a banner on each page warning that
  # it is an old version. Set this to true on each git branch
  # of stroom-docs that is not the latest release branch
  archived_version = false

  # Used in the banner on each archived page.
  # Must match the value in brackets in "version_menu" above
  version = "7.1"

  # A link to latest version of the docs. Used in the
  # "version-banner" partial to point people to the main
  # doc site. Ignored for the latest version
  url_latest_version = "/../"

  # The version number of the latest version. Used in the
  # "version-banner" partial to tell people what the latest
  # version is. Ignored for the latest version
  latest_version = "7.1"

  # The name of the github branch that this version of the
  # documentation lives on. Used for the github links in the
  # top of the right hand sidebar. Should match the last part
  # of url_latest_version.
  github_branch = "7.1"

  # A set of all the versions that are available.
  [[params.versions]]
    version = "7.1 (Latest)"
    url = "/"
  [[params.versions]]
    version = "7.0"
    url = "/7.0"
  [[params.versions]]
    version = "Legacy"
    url = "/legacy"

Automated build process

On every commit Github Actions will build the version of the site that the commit is on to ensure that Hugo can convert the content into a static site. It will also build all the other versioned branches to check that they work. On a nightly basis, Github Actions will also run a scheduled build on the HEAD commit of the master branch.

In addition to building each version of the site, it will establish if the combined site needs to be published. It will determine this by comparing the commit hashes of each version branch with the contents of a commit.sha1 file that is published in each of the version directories on https://gchq.github.io/stroom-docs. If any one of the hashes is different then the combined site will be assembled and published.

This automated build will look for any branches matching the pattern (legacy|[0-9]+\.[0-9]+) and for each one will do the following:

  • Checkout that branch
  • Build the site for that version using Hugo
    • Add the site files to a combined site
    • Generate the documenation PDF
  • Build the site with no other versions configured
    • Create a zip of the single version site

Once each site has been processed it will:

  • Copy the latest version of the site to the root of the combined site
  • Create a single zip file containing the combined site
  • Tag the release with a version number
  • Add the following release artefacts:
    • Single version site zips
    • Combined site zip
    • Single version PDFs
  • Publish the combined site to GitHub Pages https://gchq.github.io/stroom-docs .

Although the build is run on the master branch it will use the HEAD commit of each of the release branches to build the site(s).

The build and release can be forced by adding the text [publish] to the commit message on master. This is useful in testing, or if updated documentation is needed for any reason.

Merging changes

When you make changes to one of the version branches (7.0, 7.1, etc.), either directly or with a pull request from a feature branch, you will need to merge the changes up through each of the versions until they reach master. Merging up through multiple branches is tedious when done manually so you can use the merge_up.sh script in the root of this repo.

You can either run it without any arguments to merge from legacy all the way up to master with all branches in between. Alternatively you can supply the name of the branch to start from, e.g. ./merge_up.sh 7.0, which will save it doing a pointless merge up from older branches that have not changed.

./merge_up.sh 7.0
(out)Merge_up will merge changes up this chain of branches:
(out)
(out)7.0 -> 7.1 -> master
(out)
(out)It will stop if there are merge conflicts.
(out)Press [y|Y] to continue, or ctrl-c to exit...

When you run it, it will tell you the merge path and get you to confirm. If there are no merge conflicts then it will perform all the merges and return you to your current branch. If there are conflicts at any stage then it will stop at that point. You will then need to fix the conflicts and commit the merge. You can then run merge_up.sh again to do the rest of the merges.

Where to make changes

The nature of a change to the site/documentation will determine which git branch the change is made on.

Changes specific to a Stroom version

Any changes that are specific to a Stroom version, e.g. documenting a new feature in that version should be made on the oldest branch that contains that feature. If the change relates to an as yet unreleased version of Stroom then make the change on master.

Changes to the News/Releases

Adding news items or release notes for new versions should be done on the latest release branch. The News/Releases section is not included in old versions when released.

Changing the site look

Ideally changes to the look of the site, e.g. upgrading the Docsy theme sub-module to a new commit, adding shortcodes or tweaking the CSS should be done on all branches so when switching between branches the look doesn’t change. This means this sort of change should be done on the oldest published version branch and then merged up the chain to the others, e.g. legacy => 7.0 => 7.1 => master.

In some cases a change to the look may require significant refactoring of the content, e.g. changes to a shortcode. In the event of this it may be necessary to only make the change on the latest release branch and for different versions to have a slightly different look. The decision on how best to tackle these situations will have to be on a case by case basis.

Changing the GitHub Actions build process

If the change impacts the building of a single version then it needs to be done on the oldest version and merge up.

If the change only impacts the preparation of release artefacts then it can be performed on the master branch.

Building a mock multi-version site

To make it easier to test how the combined site will look with multiple versions the following script can be run to mock up a multi-version site. It does the following:

  1. Copies the content of the local repository.
  2. Amends the config file to set appropriate versions.
  3. Builds the site for that version.
  4. Copies the built site into a sub-directory matching the version in /tmp/stroom-docs_mock_combined_site/.

To run this script do:

create_mock_combined_site.sh

The combined site can be served using something like the Python simple HTTP server, e.g.

cd /tmp/stroom-docs_mock_combined_site
python -m SimpleHTTPServer 8888

Then open a browser at localhost:8888.

As each version of the site is a copy of the same thing the content will be all the same but it allows you to test the version drop down and archived banner.

4.3 - Documentation Style Guide

A guide on the house style, structure and content for this site. It should be viewed both in its rendered form and as source to understand how the page elements are formed. You should read this section before contributing to the documentation.

Overview

Stroom’s documentation is created using the static site generator Hugo . This converts markdown content into a rich HTML site. The markdown content in stroom-docs is not intended to be read as-is in GitHub, it needs to be rendered first.

The full documentation for Hugo can be found here . The site also uses the Docsy theme for Hugo. The documentation for Docsy can be found here . The Docsy theme provides a lot of the styling but also adds other features and shortcodes. You should consult the Docsy documentation in the first instance.

To maintain a degree of consistency in the documentation you should use this section as a reference for how to layout your content.

Shortcodes

The documentation makes heavy use of Hugo shortcodes for adding page elements such as links, icons, images, etc. Shortcodes make it easy to change how a page element is styled by just changing the shortcode.

Hugo includes many shortcodes , the Docsy theme adds some more and there are some bespoke stroom-docs ones in layouts/shortcodes/.

To make your life easier when editing the documentation it is highly recomended to use an editor that supports text snippets. Snippets make it very quick to add shortcodes into the documentation.

For example the following snippet adds a skeleton front matter to a page.

Ultisnips

snippet hfront "Hugo markdown metadata front matter" b
---
title: "${1:Title}"
linkTitle: "$1"
#weight:
date: `date "+%Y-%m-%d"`
tags: $2
description: >
  $3
---

$0
endsnippet

JSON (VS Code)

{
  "hugo-front-matter": {
    "prefix": "hfront",
    "body": [
      "---",
      "title: \"${1:Title}\"",
      "linkTitle: \"$1\"",
      "#weight:",
      "date: `date \"+%Y-%m-%d\"`",
      "tags: $2",
      "description: >",
      "  $3",
      "---",
      "",
      "$0"
    ],
    "description": "Hugo markdown metadata front matter"
  }
}

4.3.1 - Site Structure

Describes the file and directory structure for the site.

File names

Ideally files and directories should be named using lower-kebab-case, e.g. site-structure.md.

Directory structure

All page content, i.e. markdown, is located underneath content/en. This directory has one sub-directory for each of the top nav bar items.

Stroom-Docs top level sections

Each of the following sections can have a different styling that is appropriate to its content, e.g. documentation vs blog.

Landing Page

The landing page is located at content/en/_index.html. This is the page that users will initially see, unless visiting via a direct link.

About (about)

A single page describing what stroom is.

Documentation (docs)

This is where all the documentation for installing, administering and using stroom is located.

News/Releases (news)

This is a blog type section that contains a page for each new Stroom release and a set of blog posts for Stroom news items. The pages in the two sub-sections (news and releases) are displayed in chronalogical order based on the date key in the page’s front matter.

News (news/news)

This sub section has a flat structure with one .md file per news item. Each file should be named in the form YYYYMMDD-<name>.md. The date key should be set in the front matter to match the date of the file. Hugo will use this date key to order the files in the menu. The date should be set in ISO 8601 date format, i.e.

date: 2021-07-09
Releases (news/releases)

Each new minor version release of Stroom should have a file in this directory. They should be named in the form vXX.YY.md where XX is the zero padded major version and YY is the zero padded minor version, e.g. v07.01. The zero padding is to ensure correct ordering by default withouth having to resort to using weight in the front matter.

The front matter should be set along these lines:

---
title: "Version 7.0"
linkTitle: "7.0"
date: 2021-07-07
description: >
  Key new features and changes present in v7.0 of Stroom and Stroom-Proxy.
---

Community (community)

This section provides information for people wanting to contribute to the development of Stroom and its peripheral repositories. This can include developer documentation for building and developing Stroom. This has the same structure as docs.

Documentation content

The docs and community top level sections have a tree structure for their content. Each of these directories will contain three different types of entities:

  • Section directories
  • Section index files (_index.md)
  • Pages (e.g. building.md)

The following is an example of part of the structure of the community section.

├── documentation/                 Documentation section directory
│   ├── building.md                Page
│   ├── _index.md                  Documentation section index page
│   ├── style-guide/               Style guide section directory
│   │   ├── basic-elements.md      Page
│   │   ├── icon-gallery.md        Page     
│   │   ├── _index.md              Style guide section index page
│   │   ├── site-structure.md      Page
│   │   └── using-images.md        Page
│   └── versions.md                Page
└── roadmap.md                     Page

A section can essentially contain branches (sections) and leaves (pages). A branch (i.e. a section) is defined by a directory that contains an _index.md file. The front matter in this index file defines the meta data for that section, e.g. the title, date, tags, description, etc. A leaf (i.e. a page with no children) is just a markdown file with front matter. The front matter for branches and leaves works in the same way.

How do I…?

Add a child page

If you already have a section that you want to add a new child page to then you will already have a structure like this:

└── my-section/
    ├── _index.md
    ├── a-page.md
    └── another-page.md

To add a new page simple create a .md file for the new page in the section directory, e.g.

└── my-section/
    ├── _index.md
    ├── a-page.md
    ├── another-page.md
    └── new-page.md

Add the front matter to the top of the new page file. e.g.

---
title: "My Long Wordy Title"
linkTitle: "My Short Title"
weight: 20
date: 2022-01-27
tags: 
description: >
  A new page describing stuff.
---

The new page should now appear in the list of child pages on the section page and in the left hand navigation pane.

If you want to control the position of the new page relative to its siblings then adjust the weight of this page and that of its siblings to get the order that you want.

Add a new section

If you want to add a sub-section to an existin section then you will already have a structure like this:

└── my-section/
    ├── _index.md
    ├── a-page.md
    └── another-page.md

To add a new sub-section create a sub-directory within the existing directory (with a name that roughly matches the section name) and create an _index.md file within it, e.g.

└── my-section/
    ├── my-new-sub-section/
    │   └── _index.md
    ├── _index.md
    ├── a-page.md
    └── another-page.md

In the _index.md file add front matter to the top, e.g.

---
title: "My Long Wordy Section Title"
linkTitle: "My Short Section Title"
weight: 20
date: 2022-01-27
tags: 
description: >
  A new section for stuff.
---

As with pages, adjust the weight of the section and its siblings to get the order you require.

To add pages to this new section see Add a new child page above.

If you are not sure if you need to add a whole new sub-section or just a child page you can just add a new sub-section and add content to the _index.md file as if it were a simple page. If you later realise that you need child pages then move the content out into a child page and create other sibling pages to it.

4.3.2 - Front Matter

The meta data (or front matter) for pages/sections.

Front matter in Hugo is a set of meta data at the top of each page that controls which menus include the page as well as providing information about the page, e.g.

---
title: "Site Structure"
linkTitle: "Site Structure"
weight: 10
date: 2021-07-20
tags:
  - style
  - TODO
description: >
  Describes the file and directory structure for the site.
---

Hugo supports front matter in YAML, JSON and TOML, however for consistency all front matter in stroom-docs should be in YAML format.

This is the section/page title and will become the h1 heading (in HTML/Markdown terms) on the section/page. The linkTitle is the text that is displayed in the left hand navigation sidebar. It should be the same as title unless the title is quite long, in which case a shorter version should be used so it fits in the sidebar.

Weight

The weight controls the position of the page/section within the other pages/sections of its parent. i.e. it controls the order of the pages/sections in the left hand navigation bar and the list of child items on a section index. If no weight is provided then Hugo will use date, then linkTitle, then the file path.

To assist with re-ordering pages you can use the script change_weights.sh in the root of the repo. E.g. to change the order of the child items of the user-guide section do the following:

./change_weight.sh content/en/docs/user-guide

Date

The date should be set/updated to the current date when a page/section is created or modified. This data is show at the bottom of the page and tells the reader when the page was last updated.

Tags

In the front matter, tags is a list of tags that are applicable to the document and allow documents to be searched for by tag. Tag names should conform to the following conventions:

  • Lower kebab case, i.e. reference-data, even for abbreviations.
  • The only exception to the case rule is TODO, which is always upper case.
  • Singular, i.e. pipeline rather than pipelines.

Avoid using too many unique tag names as it will make the list of tags in the sidebar to large to be useful. When setting a tag on a document consult the list of existing tags to ensure consistency and to see if a more applicable tag already exists.

Add the TODO tag to a page when the page is incomplete. This makes it easy to find areas of the documentation that are in need of attention.

Cascading tags

If you want to apply a tag to all descendant pages of a section you can add this to the front matter of the section:

cascade:
  tags:
    - install

This will then apply all of tags added to tags to each descendant page.

Description

A short description of what the page/section covers. This will be shown on the index page of its parent.

4.3.3 - Markdown Style Conventions

House style conventions for basic Markdown use.

Line breaks

Sentence per line

Each sentence must start on a new line, even in numbered/bulleted lists. This makes it easier to move sentences around or to remove them and limits the scope of changes when it comes to git diffs and merges. When the markdown is rendered into HTML/PDF, the sentences will be joined into a single paragraph.

See this site for more of the reasons behind sentence per line. Though this link relates to Asciidoc, the same logic applies to markdown.

For example:

Do this

This is the first sentence of the paragraph.
This is the second.
This it the third and final one.

This is the start of a new paragraph.

Which renders as:

This is the first sentence of the paragraph. This is the second. This it the third and final one.

This is the start of a new paragraph.

Don’t do this

This is the first sentence of the paragraph. This is the second. This it the third and final one.

This is the start of a new paragraph.

Which renders as:

This is the first sentence of the paragraph. This is the second. This it the third and final one.

This is the start of a new paragraph.

No hard line breaks.

Long lines should not be hard wrapped by adding line breaks. You should instead rely on your editor to soft wrap long lines that cannot fit on the visible screen area. The process of hard wrapping long lines will vary from editor to editor and not all editors support re-wrapping lines after the content has changed. It also relies on each person’s editor being configured to the same wrap column. Adding hard wraps also means a slight change at the start of a paragraph will potentially cause all subsequent lines to be re-wrapped and thus appear as a substantial difference in the commit.

## Don't do this

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor
incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis
nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.
Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu
fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in
culpa qui officia deserunt mollit anim id est laborum.


## Do this instead

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.
Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.
Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur.
Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.
Both examples render as:

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.

Forced line breaks

In some circumstances, e.g. a list of items that is not bulleted, you may want to prevent the joining of adjacent lines when rendered. You can force a line break by adding two spaces ␣␣ at the end of a line.

Do this

Paragraph 1.

One␣␣
Two␣␣
Three

Paragraph 2.

Which renders as:

Paragraph 1.

One
Two
Three

Paragraph 2.

Don’t do this

Paragraph 1.

One
Two
Three

Paragraph 2.

Which renders as:

Paragraph 1.

One Two Three

Paragraph 2.

Blank lines and spacing

  • A heading line should be preceded by two blank lines and followed by one blank line. This makes the headings clearer in the markdown source. The only exception to this is when one heading come immediately after its parent heading with no text in between.
  • A fenced code block should be surrounded by one blank line.
  • Paragraphs should be separated by one blank line.
  • Bulleted and numbered lists should be surrounded by one blank line.
  • Additional sentences in bulleted/numbered lists should be indented for clarity in the raw markdown.

e.g:

The text belonging to the previous heading.


## A Heading

## A sub heading

The text of this heading.
A second sentence in this paragraph.

A new paragraph.
A second sentence in this paragraph.

Here are some bullets:

* Bullet Z.
* Bullet A.
  This is an additional sentence for this bullet point.
  And so is this.
  * Sub-bullet AX.
    This is an additional sentence for this bullet point.
    And so is this.
* Bullet F.

Here are some numbered steps:

1. Step 1.
1. Step 2.
1. Step 3.

Another random line.


## Another Heading

Headings

The page title uses heading level one (# in markdown) so all markdown headings should be >= 2 (## , ### , #### , etc.). Headings should have two blank lines above them for clarity in the raw markdown. The # characters should always be followed by one space character

The following is an example of the heading levels.

# Heading level 1

DON'T use this level in your documents.
Level one headings will be generated from the `title` in the document's front matter.


## Heading level 2


### Heading level 3


#### Heading level 4


##### Heading level 5


###### Heading level 6

Markdown supports an alternate style for headings, as shown below. Don’t use this style as it is not clear from the symbols what the heading level is.


Heading level 1
===============

Don't use this style.


Heading level 2
---------------

Don't use this style.

Table of contents

The page table of contents (right hand pane) is controlled by this in config.toml.

[markup]
  [markup.tableOfContents]
    endLevel = 4
    ordered = false
    startLevel = 2

The maximum depth of the table of contents can be controlled with endLevel.

Heading example (level 2)

This is an example of a level 2 heading.

Heading example (level 3)

This is an example of a level 3 heading.

Heading example (level 4)

This is an example of a level 4 heading.

Heading example (level 5)

This is an example of a level 5 heading.

Heading example (level 6)

This is an example of a level 6 heading.

Block quotes

Single line

A simple paragraph block quote.

> This is a simple block quote.
> This is the second sentence on the same line.

This is a simple block quote. This is the second sentence on the same line.

Multi line

A pair of spaces at the end of a line can be used to force line breaks, e.g.:

> This is a multi line block quote.␣␣
> This is the second line.␣␣
> This is the third line.

This is a multi line block quote.
This is the second line.
This is the third line.

Lists

Bulleted list

Rendered

  • Fruit. Make sure you get your five-a-day.
  • Meat
    • Beef
    • Chicken
  • Vegetables.

Markdown

* Fruit.
  Make sure you get your five-a-day.
* Meat
    * Beef
    * Chicken
* Vegetables.

Numbered List

Numbered list items should all be numbered with number 1 so that the markdown render handles the consecutive numbering. This makes the file easier to edit and means the addition of one item in the middle does not cause a change to all the lines after it, e.g:

Rendered

  1. Item one. This is some extra content for step 1.
  2. Item two.
    1. Sub-item A.
    2. Sub-item B.
  3. Item three.

Markdown

1. Item one.
   This is some extra content for step 1.
1. Item two.
    1. Sub-item A.
    1. Sub-item B.
1. Item three.

Check List

Rendered

  • Item 1. This is some extra content for item 1.
  • Item 2.
    • Item 2a.
    • Item 2b.
  • Item 3.

Markdown

* [ ] Item 1.
      This is some extra content for item 1.
* [ ] Item 2.
    * [x] Item 2a.
    * [ ] Item 2b.
* [x] Item 3.

Definition list

Rendered

Name
Godzilla
Birthplace
Japan
Color
Green

Markdown

Name
: Godzilla

Birthplace
: Japan

Color
: Green

Tables

Tables should ideally have its columns aligned in the markdown for clarity in the raw markdown.

## Ideally do this

| Artist          | Album          | Year |
|-----------------|----------------|------|
| Michael Jackson | Thriller       | 1982 |
| Prince          | Purple Rain    | 1984 |
| Beastie Boys    | License to Ill | 1986 |

## But this is acceptable

| Artist | Album | Year |
|-|-|-|
| Michael Jackson | Thriller | 1982 |
| Prince | Purple Rain | 1984 |
| Beastie Boys | License to Ill | 1986 |

Both will produce the same result. The latter can be harder to read in markdown form. The former is harder to create and update in markdown form.

Artist Album Year
Michael Jackson Thriller 1982
Prince Purple Rain 1984
Beastie Boys License to Ill 1986

Comments

As the Markdown content is procesed by Hugo and is not intended to be read in its raw Markdown form it means it is possible to include comments in the content. This can be useful when you want to leave development comments in the content that are not for display in the rendered site. Comments are done with the HTML comment syntax, i.e.

<!-- This is a comment -->

<!--
This is a
mult-line comment
-->

4.3.4 - Additional Page Elements

Examples of various markdown and Hugo page elements.

While links can be added using standard markdown link syntax you should use Hugo shortcodes to add them. The advantage of the shortcode is that Hugo will check for broken links when building the site.

As this site is deployed to environments with no internet connect and is also released in PDF form it is important that any links to locations outside of the this site (i.e. on the internet) are clearly marked. To include an external link do the following:

  • This is a link to Stroom on Github with a title.

    This is a link to {{< external-link "Stroom on Github" "https://github.com/gchq/stroom" >}} with a title.
    
  • This is the same link with no title, https://github.com/gchq/stroom .

    This is the same link with no title, {{< external-link "https://github.com/gchq/stroom" >}}.
    

Versioned URLs

Some external links are to other Stroom URLs are versioned. If you need to link to a site external to this one that has the Stroom version in the URL then you can use the tag @@VERSION@@ in the URL. This will be translated into the Stroom version of this site, as seen in the Stroom Version (…) drop down at the top of the page. This saves you from having to update the URL on each release of Stroom.

Anchors

You can link to headings on a page using its anchor. The anchor for a heading is the heading text with:

  • All non-alphanumeric characters removed
  • Spaces replaced with a -
  • All characters made lower case
  • Multiple consecutive - characters, e.g. --- are replaced with a single -

For example the heading Mr O'Neil's 1st Event (something) becomes as an anchor #mr-oneils-1st-event-something.

See The link examples below that use anchors.

Duplicate anchors

If you have two headings on the same page then Hugo will suffix the anchors with a sequential number to ensure uniqueness of the anchor. For example, with the following markdown:

## Apples

### Example

## Oranges

### Example

Hugo will create the following anchors:

apples
example
oranges
example-1

If you want to avoid confusion and removed the risk of anchors breaking if new headings are added in the middle, then you can explicitly name anchors:

## Apples

### Example {#apples-example}

## Oranges

### Example {#oranges-example}

This is only worth doing if you want to link to these heading.

Shortcode links are slightly more verbose to type but are preferable to markdown style links as the link target will be checked at site build time so you know all the links are correct.

Hugo has ref and relref link shortcodes. Use only relref as this will be translated into a relative path when the site it built ensuring that the site can be run from any base path.

The following are some example of different links to internal content.

Heading anchor

  • A link to a heading anchor on this page.

    [link]({{< relref "#alerts" >}})
    

Absolute path

  • A link to a heading anchor on another page, using an absolute path.

    [link]({{< relref "community/documentation/style-guide/using-images#captions" >}})
    

Relative path

  • A link to a heading anchor on page above this one, using a relative path.

    [link]({{< relref "../versions" >}})
    

Unique page name

  • A link to a heading anchor on another page, using only the unique page name. This is quicker to type and won’t break if pages are moved but will not work if the page name is not unique.

    [link]({{< relref "running#basic-configuration" >}})
    
  • A link to a branch/section in the document tree, i.e. to the \_index.md.

    [link]({{< relref "docs/HOWTOs" >}})
    
  • A link to the next page in the current section. If the current page is the last page in the section then no link will be displayed. What the next page is is defined by the page weights or the default ordering of pages in the section.

    This is useful when you have a set of pages in a section that have a natural flow, e.g. where the pages in a section are the sequential steps in an installation guide.

    The link looks like this(with the page title in the link text and the hover tip showing both the page title and the description):

    Next page - Images
    {{< next-page >}}
    
  • A link to the previous page in the current section. If the current page is the last page in the section then no link will be displayed. What the previous page is is defined by the page weights or the default ordering of pages in the section.

    This is useful when you have a set of pages in a section that have a natural flow, e.g. where the pages in a section are the sequential steps in an installation guide.

    The link looks like this(with the page title in the link text and the hover tip showing both the page title and the description):

    Previous page - Markdown Style Conventions
    {{< prev-page >}}
    

Markdown style links should not contain the .md extension as this will be stripped when the site is generated, e.g. for the following content:

/content
   /en
      /docs
         /section-x
            /sub-section-a
               _index.md
               page1.md
               page2.md
            /sub-section-b
               _index.md
               page1.md
               page2.md

This will become:

/docs
   /section-x
      /sub-section-a
         /page1
         /page2
      /sub-section-b
         /page1
         /page2

in the rendered site.

  • A link to a heading anchor on this page.

    [link](#alerts)
    
  • A link to a heading anchor on another page, using a relative link.

    [link](../using-images#captions)
    
  • A link to a heading anchor on another page, using an absolute link.

    [link](/docs/style-guide/using-images#captions)
    

You can create a link to download a file, like these:

{{< file-link "quick-start-guide/mock_stroom_data.csv" >}}Link Title{{< /file-link >}}

{{< file-link "quick-start-guide/mock_stroom_data.csv" />}}

All paths are relative to /assets/files/.

If you need to create a link to an item in the Glossary you can use the glossary shortcode. E.g.

  • A feed is something you should know about, and so are streams .

    A {{< glossary "feed" >}} is something you should know about, and so are {{< glossary "stream" "streams" >}}.
    

The argument to the shortcode is the glossary term. This should match the heading text on the Glossary page exactly, ignoring case. It will be converted to an HTML anchor so that you can link directly to the heading for the term in question.

Code

Inline code

Rendered

Inline code looks like this.

Markdown

Inline code `looks like this`.

Code blocks (simple)

Code blocks should be surrounded with fences ```language-type and ``` with the language type always specified to ensure correct syntax highlighting. If the language type is not supplied then styling will be different to fenced blocks with a language.

This is a markdown example of a fenced code block containing XML content.

Rendered

<root>
  <child attr="xxx">some val</child>
</root>

Markdown

```xml
<root>
  <child attr="xxx">some val</child>
</root>
```

The following are some example of rendered code blocks:

Plain Text

id,date,time
1,6/2/2018,10:18
2,12/6/2017,5:58
3,6/7/2018,11:58

YAML

---
root:
  someKey: "value"

XML

<root>
  <child attr="xxx">
    some val
  </child>
</root>

bash

echo "${VAR}"

code blocks (advanced)

If you need to show line numbers or to highlight sections of a code block then you can use the code-block shortcode. This shortcode takes the following named arguments:

  • language - The language for syntax highlighting. Defaults to text.
  • lines - Whether to display line numbers or not (true|false). Defaults to true.
  • highlight - A comma separate list of lines to highlight. Ranges of line numbers can be specified, e.g. 2-8,13,25-30. Defaults to no line highlighting.
  • start - The line number to start at. Defaults to 1.

The following is an example of how to use the shortcode.

{{< code-block language="xml" highlight="2-5,8" >}}
<root>
  <child attr="xxx">
    some val
  </child>
  <child attr="xxx">
    some val
  </child>
  <child attr="xxx">
    some val
  </child>
</root>
{{< /code-block >}}

Default behaviour

{{< code-block >}}
...
{{< /code-block >}}
<root>
  <child attr="xxx">
    some val
  </child>
  <child attr="xxx">
    some val
  </child>
  <child attr="xxx">
    some val
  </child>
</root>

With line numbers, a language and a starting line number

{{< code-block language="xml" start="5" >}}
...
{{< /code-block >}}
  <child attr="xxx">
    some val
  </child>
  <child attr="xxx">
    some val
  </child>
</root>

With line numbers, a language and highlighted lines

{{< code-block language="xml" highlight="2-5,8" >}}
...
{{< /code-block >}}
<root>
  <child attr="xxx">
    some val
  </child>
  <child attr="xxx">
    some val
  </child>
  <child attr="xxx">
    some val
  </child>
</root>

With a language and highlighted lines, but without line numbers

{{< code-block language="xml" lines="false" highlight="2-5,8" >}}
...
{{< /code-block >}}
<root>
  <child attr="xxx">
    some val
  </child>
  <child attr="xxx">
    some val
  </child>
  <child attr="xxx">
    some val
  </child>
</root>

Command line blocks

To demonstrate commands being run on the command line you can use the command-line shortcode. This results in a code block with the shell prompt displayed on the left of each line. It also means the prompt part is not selectable when the user selects the text for copy/pasting.

The shortcode takes the following positional arguments:

  1. username - The username to appear in the prompt, defaults to user.
  2. hostname - The hostname to appear in the prompt, defaults to localhost.
  3. language - The language of the content (a valid and installed prism language name language name), defaults to bash.

If you want to display shell output then prefix each output line with (out). It will then be displayed without a prompt. To display a blank line with no prompt then have a line with just (out) in it.

If your shell command is very long then you can split it into multiple lines using the shell line continuation character \ which must be the last character on the line. If this character is present then it will be rendered with a different prompt to indicate it is a continuation. Readers can then copy/past the muli-line command into a shell and run it.

Rendered

echo hello \
world
(out)hello world
id
(out)uid=1000(david) gid=1000(david)

Markdown

{{< command-line "david" "wopr" >}}
echo hello \
world
(out)hello world
id
(out)uid=1000(david) gid=1000(david)
{{< command-line >}}

MySQL shell blocks

To demonstrate commands being run in a MySQL shell you can use the sql-shell shortcode. This works in a similar way to the command-line shortcode but has a different prompt and no shortcode arguments.

If you want to display shell output then prefix each output line with (out). It will then be displayed without a prompt.

If your sql statement is multi-line, prefix all lines except the first with (con) (for continuation). Continuation lines will be rendered with a continuation prompt (->).

To display a blank line with no prompt then have a line with just (out) in it.

Rendered

select *
(con)from token_type
(con)limit 2;
(out)+----+------+
(out)| id | type |
(out)+----+------+
(out)|  1 | user |
(out)|  2 | api  |
(out)+----+------+
(out)2 rows in set (0.00 sec)
(out)
select database();
(out)+------------+
(out)| database() |
(out)+------------+
(out)| stroom     |
(out)+------------+
(out)1 row in set (0.00 sec)

Markdown

{{< sql-shell >}}
select *
(con)from token_type
(con)limit 2;
(con)+----+------+
(con)| id | type |
(con)+----+------+
(con)|  1 | user |
(con)|  2 | api  |
(con)+----+------+
(out)2 rows in set (0.00 sec)
(out)
select database();
(out)+------------+
(out)| database() |
(out)+------------+
(out)| stroom     |
(out)+------------+
(out)1 row in set (0.00 sec)
{{< sql-shell >}}

Inline files

Some code or text examples may be too large for a fenced block so you can put the content in a separate file and include it in-line like so.

<?xml version="1.1" encoding="UTF-8"?>
<dataSplitter
    xmlns="data-splitter:3"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="data-splitter:3 file://data-splitter-v3.0.1.xsd"
    version="3.0">
  <!-- 
  GEOHOST REFERENCE FEED:
  
  CHANGE HISTORY
  v1.0.0 - 2020-02-09 John Doe
  
  This is a reference feed for device Logical and Geographic data.
  
  The feed provides for each device
  * the device FQDN
  * the device IP Address
  * the device Country location (using ISO 3166-1 alpha-3 codes)
  * the device Site location
  * the device Building location
  * the device Room location
  *the device TimeZone location (both standard then daylight timezone offsets from UTC)
  
  The data is a TAB delimited file with the first line providing headings.
  
  Example data:
  
  FQDN	IPAddress	Country	Site	Building	Room	TimeZones
stroomnode00.strmdev00.org	192.168.2.245	GBR	Bristol-S00	GZero	R00	+00:00/+01:00
stroomnode01.strmdev01.org	192.168.3.117	AUS	Sydney-S04	R6	5-134	+10:00/+11:00
host01.company4.org	192.168.4.220	USA	LosAngeles-S19	ILM	C5-54-2	-08:00/-07:00
  
  -->
  
  <!-- Match the heading line - split on newline and match a maximum of one line  -->
  <split delimiter="\n" maxMatch="1">
   
   <!-- Store each heading and note we split fields on the TAB (&#9;) character -->
     <group>
       <split delimiter="&#9;">
         <var id="heading"/>
       </split>
     </group>
   </split>
   
  !-- Match all other data lines - splitting on newline -->
  <split delimiter="\n">
    <group>
      <!-- Store each field using the column heading number for each column ($heading$1) and note we split fields on the TAB (&#9;) character -->
       <split delimiter="&#9;">
         <data name="$heading$1" value="$1"/>
       </split>
    </group>
  </split>
</dataSplitter>



Example in-line XML file ( Download in_line_file_example.xml )

The card has a maximum height and will show scrollbars as required.

Examples of how to use in-line files are:

{{< textfile "style-guide/in_line_file_example.xml" "xml" >}}My caption{{< /textfile >}}
{{< textfile "style-guide/in_line_file_example.xml" >}}My caption{{< /textfile >}}
{{< textfile "style-guide/in_line_file_example.xml" />}}

Supported languages

This site uses Prismjs for syntax highlighing code blocks. PrismJs supports a large number of different languages however only certain languages have been included with this site. The language specified in the markdown code fence or in the command-line shortcode must be in the list of included languages.

The list of included language names are:

sh
bash
css
csv
groovy
http
java
javascript
jq
json
python
regex
scss
sql
text
toml
xml
yaml

To include extra languages in this site you need to build a new version of the prism.js and prism.css files. This can be done here . When creating new versions of these file you must include the languages and plugins already included else you may break this site. The generated files are then copied over the top of /static/css/prism.css and /static/js/prism.js. Both files include a comment at the top with the link to the PrismJs download page with the currently included items selected. Use this link then add any additional items, bearing in mind the size of the download and its impact on page load times.

An example of the download link is https://prismjs.com/download.html#themes=prism&languages=markup+css+clike+javascript+bash+csv+groovy+java+jq+json+markdown+python+regex+scss+sql+toml+yaml&plugins=line-highlight+line-numbers+command-line+toolbar+copy-to-clipboard+treeview */

Alerts

Various page/block level quotes for drawing attention to things.

Warning block Quote

The markdown for this is:

{{% warning %}}
This is a warning that can contain _markdown_.
{{% /warning %}}

Page level warning

Warning

This is a warning that can contain markdown.

The markdown for this is:

{{% page-warning %}}
This is a warning that can contain _markdown_.
{{% /page-warning %}}

Note block Quote

The markdown for this is:

{{% note %}}
This is a note that can contain **markdown**.
{{% /note %}}

See also block Quote

Useful for linking to other areas of the documentation or to external sites.

The markdown for this is:

{{% see-also %}}
[Note block quote]({{< relref "#note-block-quote" >}})  
[Warning block quote]({{< relref "#warning-block-quote" >}})
{{% /see-also %}}

Page level info

This is some info that can contain markdown.

The markdown for this is:

{{% pageinfo %}}
This is some info that can contain **markdown**.
{{% /pageinfo %}}

TODO block Quote

Used to indicate areas of the documentation that are unfinished or incorrect.

The markdown for this is:

{{% todo %}}
This is a TODO that can contain `markdown`.
{{% /todo %}}

Cards

Cards can be used to display related content side by side. Each card can contain markdown and/or Hugo short codes. The cards will be displayed horizontally to fill the width of the page.

YAML

---
root:
  someKey: "value"

XML

<root>
  <child attr="xxx">some val</child>
</root>

The markdown for this is:

{{< cardpane >}}
  {{< card header="YAML" >}}
```yaml
---
root:
  someKey: "value"
```
  {{< /card >}}
  {{< card header="XML" >}}
```xml
<root>
  <child attr="xxx">some val</child>
</root>
```
  {{< /card >}}
{{< /cardpane >}}

Tabbed panes

Hugo/Docsy have shortcodes for tabbed panes however these mean only one tab will be printed or visible in the generated PDF so their use should be avoided.

4.3.5 - Images

Examples of how to include images in documents.

Image assets

All Images should be placed in /assets/images/ or within a descendent directory of it. Images should be added to the markdown using the image shortcode. This ensures a consistent look for all images and allows control of the size of the image.

The short code can be added in the following ways.

Markdown:

{{< image "style-guide/stroom-oo.svg" "200x" >}}

{{< image "style-guide/stroom-oo.png" >}}

{{< image "style-guide/stroom-oo.svg" "200x" >}}Image caption{{< /image >}}

All paths used in the image shortcode are relative to /assets/images.

The following shows an example of the directory structure.


/assets
   /images
      /section-x
         /sub-section-y
            /page1
               /image.svg
/content
   /en
      /docs
         /section-x
            /sub-section-y
               page1.md - #image shortcode used in here

Where images are only used by one page then the directory structure in /assets ought to mirror that of the page the images are used in, as shown above. If images are used by multiple pages then some other sensible organisation of the images should be used, e.g. /assets/images/section-x if they are limited to pages in one section, or /aaets/images/common if they are used in multiple sections.

Captions

The image can be displayed with a caption:

Example:

images/style-guide/svg-logo.svg

By W3C SVG Logo, CC BY-SA 4.0, https://commons.wikimedia.org/w/index.php?curid=105996438

Markdown:

{{< image "style-guide/svg-logo.svg" "200x" >}}
By W3C SVG Logo, CC BY-SA 4.0, https://commons.wikimedia.org/w/index.php?curid=105996438
{{< /image >}}

Size

The image can be defined with a maximum width (e.g. "300x") or a maximum height ("x200").

Example:

images/style-guide/svg-logo.svg

Markdown:

{{< image "style-guide/svg-logo.svg" "120x" />}}

.png files

.png files can be rendered in their original size by omitting the size argument.

Examples:

images/style-guide/stroom-amber.png

Or they can be rendered with a set size.

images/style-guide/stroom-amber.png

Markdown:

The markdown for the examples above is:

{{< image "style-guide/stroom-amber.png" />}}

Or they can be rendered with a set size.

{{< image "style-guide/stroom-amber.png" "50x"/>}}

Using global /assets/ resources

For images that are shared by multiple page bundles, e.g. stroom icons, place them in /assets/images/. The image path is relative to /assets/images/, e.g. file /assets/images/style-guide/svg-example.svg becomes style-guide/svg-example.svg.

Example:

images/style-guide/svg-example.svg

This is some optional caption text for the image. And this is another line.

Markdown:

{{< image "style-guide/svg-example.svg" "200x" >}}
This is some optional caption text for the image.
And this is another line.
{{< /image >}}

PlantUML

PlantUML is the favoured tool for producing diagrams such as UML diagrams, entity relationship diagrams and other more general architecture diagrams. The diagrams are written in plain text which makes them easy to version control. The plantUML syntax can then be converted into image files, e.g. .svg files.

A plantUML diagram looks like this in plain text form:

@startuml
Alice -> Bob: Authentication Request
Bob --> Alice: Authentication Response

Alice -> Bob: Another authentication Request
Alice <-- Bob: Another authentication Response
@enduml

PlantUML diagrams should be saved in a dedicated .puml file in the same folder as the page that will display it. If it is needed by multiple pages then it should be saved in /assets/images/.

The build process will convert all .puml files to a corresponding .puml.svg file. These generated .puml.svg files are ignored by git so need to be regenerated at build time or when you change a .puml file. The images can be generated by doing:

./container_build/runInPumlDocker.sh SVG

You should embed a PlantUML image like this, using the .puml.svg file (that may not yet exist, but will have to exist before the site is built):

Example:

images/style-guide/puml-example.puml.svg

Markdown:

{{< image "style-guide/puml-example.puml.svg" "300x" />}}

Using page resources

Images can be located in a page bundle . This is where the page is defined as a named directory (rather than a .md file) with an associated index.md file for the markdown contnet. All other items in the directory are page resources that can be used by the page, i.e. image files.

Use the image short code to display an image file that is located in the same directory as the page. For the short code to work the page must be a leaf bundle (index.md) or a branch bundle (_index.md), i.e:

/docs
   /MyPage
      index.md - #image shortcode used in here
      example.svg

or

/docs
   /MySection
      /Page1
         index.md
      /Page2
         index.md
      _index.md - #image shortcode used in here
      example.svg

In the above example, the shortcode would look like:

{{< image "example.svg" "200x" >}}
images/style-guide/stroom-oo.svg

Stroom user interface Components

Sometimes it is useful to display an image of certain user interface elements to explain something. Rather than use screenshots which are very difficult to keep up to date, you can instead use some simple shortcodes to display some UI elements, e.g. buttons, pipeline elements, etc. By using shortcodes, any change to the look of the Stroom UI means only the shortcode content and their styling need to change, without having to recreate tens or hundreds of screenshots.

Stroom icons

Stroom UI icons such as add.svg or explorer.svg can be added in line using the shortcode stroom-icon.

Arguments:

  • icon_file_path - The filename (and path) of the icon file. The path is relative to /assets/images/stroom-ui/.
  • title (optional) - The hover tip title that will be given to the icon.
  • state (optional) [enabled|disabled] - Whether the button is enabled or disabled. Defaults to enabled.

The full list of available icons can be found in the Icon Gallery.

Examples:

Simple use: save.svg

Custom hover tip name: key.svg

A document icon: document/Feed.svg

A pipeline icon: pipeline/text.svg

Enabled delete.svg vs disabled delete.svg

Markdown:

The markdown for the examples above is:

Simple use: {{< stroom-icon "save.svg" >}}

Custom hover tip name: {{< stroom-icon "key.svg" "Not a key" >}}

A document icon: {{< stroom-icon "document/Feed.svg" >}}

A pipeline icon: {{< stroom-icon "pipeline/text.svg" >}}

Enabled {{< stroom-icon "delete.svg" >}} vs disabled {{< stroom-icon "delete.svg" "Delete" "disabled" >}}

Buttons

To display a user interface button you can use the shortcode stroom-btn with the button title as its only argument.

Arguments:

  • title - The text to display on the button.

Examples:

Ok and Cancel

And not in line

Save

Markdown:

The markdown for the examples above is:

{{< stroom-btn "Ok" >}} and {{< stroom-btn "Cancel" >}}

And not in line

{{< stroom-btn "Save" >}}<br/>

Pipeline elements

To display a pipeline element (as seen on the Structure sub-tab on the Pipeline screen), like split.svg SplitFilter , you can use the shortcode pipe-elm.

Arguments:

  • element_name - The name of the pipeline element (case sensitive), e.g. XSLTFilter.
  • display_name (optional) - The display name for the pipeline element. If a display name is not provided then the element name will be used as the display name.

The list of available pipeline elements can be found in this gallery. An invalid element_name will result in an error when building the site.

The icon will be selected to match the element name provided. The element is a clickable link to the appropriate reference page for that element.

Examples:

This is an xsltFilter with its default name:

xslt.svg XSLTFilter

This is a splitFilter with a custom name:

split.svg My Split Filter

This is an index.svg IndexingFilter in line.

Markdown:

The markdown for the examples above is:

This is an xsltFilter with its default name:

{{< pipe-elm "XSLTFilter" >}}<br/>

This is a splitFilter with a custom name:

{{< pipe-elm "SplitFilter" "My Split Filter" >}}<br/>

This is an {{< pipe-elm "IndexingFilter" >}} in line.

Pipelines

To display a pipeline consisting of multiple pipeline elements (as seen on the Structure sub-tab on the Pipeline screen) you can use the short code pipe.

This shortcode takes no arguments. Instead, the inner content of the shortcode is populated with multiple pipe-elm shortcodes to describe each of the elements in the pipeline. This shortcode does not support any branching/forking in the pipeline.

Example:

Markdown:

The markdown for the two examples above is:

{{< pipe >}}
  {{< pipe-elm "Source" >}}
  {{< pipe-elm "XMLParser" >}}
  {{< pipe-elm "RecordCountFilter" "recordCount (read)" >}}
  {{< pipe-elm "SplitFilter" >}}
  {{< pipe-elm "IdEnrichmentFilter" >}}
  {{< pipe-elm "XSLTFilter" >}}
  {{< pipe-elm "SchemaFilter" >}}
  {{< pipe-elm "ElasticIndexingFilter" >}}
  {{< pipe-elm "RecordCountFilter" "recordCount (written)" >}}
{{< /pipe >}}

Each element is a clickable link to the appropriate reference page for that element. Pipelines cannot be used in-line in text.

For details on how to use pipe-elm see pipeline elements above. The list of available pipeline elements can be found in this gallery.

Stroom document tabs

To display a top level Stroom document tab, like Index.svg Big Index × , you can use the shortcode stroom-tab.

Arguments:

  • icon_filename - The filename of the icon to use (relative to assets/images/stroom-ui/document/) (case sensitive), e.g. Pipeline.svg.
  • title - The text to display in the tab, e.g. Indexing Pipeline.
  • state (optional) - Whether the tab is active or not (active or inactive). Defaults to inactive.

For a full list of all available icons see the Icon Gallery

Examples:

Simple: Feed.svg MY_FEED ×

Custom name: XSLT.svg My Translation ×

Active: XSLT.svg My Translation ×

Unsaved: XSLT.svg * My Translation ×

Markdown:

The markdown for these examples is:

Simple: {{< stroom-tab "Feed.svg" "MY_FEED" >}}
Custom name: {{< stroom-tab "XSLT.svg" "My Translation" >}}
Active: {{< stroom-tab "XSLT.svg" "My Translation" "active" >}}
Unsaved: {{< stroom-tab "XSLT.svg" "My Translation" "active" "unsaved" >}}

Stroom selected menu items

To display the selection of a menu item you can use the stroom-menu shortcode.

Arguments:

  • menu_item_names... - One argument per menu item name in the order root to leaf.

Examples:

For example to demonstrate creating a folder using the context menu:

add.svg
New
folder.svg
Folder

The shortcode takes one argument per menu item so you can have multiple levels of menu.

add.svg
Add
folder.svg
Folder
document/Feed.svg
Feed

Markdown:

The markdown for these examples is:

For example to demonstrate creating a folder using the context menu:

{{< stroom-menu "New" "Folder" >}}

The shortcode takes one argument per menu item so you can have multiple levels of menu.

{{< stroom-menu "Add" "Folder" "Feed" >}}

It cannot be used in-line in text, it needs to be on its own line.

The list of available menu items with an icon can be found in this gallery. Menu item names are case-sensitive.

If the menu item name is not an exact match to one in the gallery then it will be displayed without an icon, e.g.:

add.svg
New
Banana

4.3.6 - Icon Gallery

A gallery of all the icons in use in stroom for reference.

This page can be used as a reference for finding icons and their filenames to use them in the documentation.

See here for how to add icons to pages.

General icons

General icons used in Stroom.

Example: edit.svg {{< stroom-icon "edit.svg" >}}

images/stroom-ui/add-above.svg add-above.svg
images/stroom-ui/add-below.svg add-below.svg
images/stroom-ui/add.svg add.svg
images/stroom-ui/alert.svg alert.svg
images/stroom-ui/clear.svg clear.svg
images/stroom-ui/close-grey.svg close-grey.svg
images/stroom-ui/close.svg close.svg
images/stroom-ui/collapse-up.svg collapse-up.svg
images/stroom-ui/copy.svg copy.svg
images/stroom-ui/database.svg database.svg
images/stroom-ui/delete.svg delete.svg
images/stroom-ui/deleted.svg deleted.svg
images/stroom-ui/dependencies.svg dependencies.svg
images/stroom-ui/disable.svg disable.svg
images/stroom-ui/down.svg down.svg
images/stroom-ui/download.svg download.svg
images/stroom-ui/drop-down.svg drop-down.svg
images/stroom-ui/dropDown.png dropDown.png
images/stroom-ui/edit.svg edit.svg
images/stroom-ui/ellipses-grey.svg ellipses-grey.svg
images/stroom-ui/ellipses-horizontal.svg ellipses-horizontal.svg
images/stroom-ui/ellipses-vertical.svg ellipses-vertical.svg
images/stroom-ui/error.svg error.svg
images/stroom-ui/expand-down.svg expand-down.svg
images/stroom-ui/explorer.svg explorer.svg
images/stroom-ui/fast-backward-green.svg fast-backward-green.svg
images/stroom-ui/fast-backward.svg fast-backward.svg
images/stroom-ui/fast-forward-green.svg fast-forward-green.svg
images/stroom-ui/fast-forward.svg fast-forward.svg
images/stroom-ui/fatal.svg fatal.svg
images/stroom-ui/favourites.svg favourites.svg
images/stroom-ui/feed.svg feed.svg
images/stroom-ui/field.svg field.svg
images/stroom-ui/file-formatted.svg file-formatted.svg
images/stroom-ui/file-raw.svg file-raw.svg
images/stroom-ui/file.svg file.svg
images/stroom-ui/filter-green.svg filter-green.svg
images/stroom-ui/filter.svg filter.svg
images/stroom-ui/folder-tree.svg folder-tree.svg
images/stroom-ui/folder.svg folder.svg
images/stroom-ui/format.svg format.svg
images/stroom-ui/function.svg function.svg
images/stroom-ui/generate.svg generate.svg
images/stroom-ui/help.svg help.svg
images/stroom-ui/hide.svg hide.svg
images/stroom-ui/history.svg history.svg
images/stroom-ui/info-deleted.svg info-deleted.svg
images/stroom-ui/info-warning.svg info-warning.svg
images/stroom-ui/info.svg info.svg
images/stroom-ui/jobs.svg jobs.svg
images/stroom-ui/key.svg key.svg
images/stroom-ui/lock-green.svg lock-green.svg
images/stroom-ui/locked-amber.svg locked-amber.svg
images/stroom-ui/logo.svg logo.svg
images/stroom-ui/logout.svg logout.svg
images/stroom-ui/monitoring.svg monitoring.svg
images/stroom-ui/move.svg move.svg
images/stroom-ui/nodes.svg nodes.svg
images/stroom-ui/oo.svg oo.svg
images/stroom-ui/operator.svg operator.svg
images/stroom-ui/password.svg password.svg
images/stroom-ui/pause.svg pause.svg
images/stroom-ui/play-green.svg play-green.svg
images/stroom-ui/play.svg play.svg
images/stroom-ui/popup.png popup.png
images/stroom-ui/process.svg process.svg
images/stroom-ui/properties.svg properties.svg
images/stroom-ui/question.svg question.svg
images/stroom-ui/raw.svg raw.svg
images/stroom-ui/refresh-green.svg refresh-green.svg
images/stroom-ui/refresh.svg refresh.svg
images/stroom-ui/remove.svg remove.svg
images/stroom-ui/ruleset.svg ruleset.svg
images/stroom-ui/save.svg save.svg
images/stroom-ui/saveas.svg saveas.svg
images/stroom-ui/settings-blue.svg settings-blue.svg
images/stroom-ui/settings-grey.svg settings-grey.svg
images/stroom-ui/settings.svg settings.svg
images/stroom-ui/shard-close.svg shard-close.svg
images/stroom-ui/shard-flush.svg shard-flush.svg
images/stroom-ui/show.svg show.svg
images/stroom-ui/step-backward-green.svg step-backward-green.svg
images/stroom-ui/step-backward.svg step-backward.svg
images/stroom-ui/step-forward-green.svg step-forward-green.svg
images/stroom-ui/step-forward.svg step-forward.svg
images/stroom-ui/step.svg step.svg
images/stroom-ui/stepping-circle.svg stepping-circle.svg
images/stroom-ui/stepping.svg stepping.svg
images/stroom-ui/stop-red.svg stop-red.svg
images/stroom-ui/stop.svg stop.svg
images/stroom-ui/table-nested.svg table-nested.svg
images/stroom-ui/table.svg table.svg
images/stroom-ui/terminate.png terminate.png
images/stroom-ui/tree-closed.svg tree-closed.svg
images/stroom-ui/tree-leaf.svg tree-leaf.svg
images/stroom-ui/tree-open.svg tree-open.svg
images/stroom-ui/undo.svg undo.svg
images/stroom-ui/unlock-amber.svg unlock-amber.svg
images/stroom-ui/unlocked-green.svg unlocked-green.svg
images/stroom-ui/up.svg up.svg
images/stroom-ui/upload.svg upload.svg
images/stroom-ui/user-disabled.svg user-disabled.svg
images/stroom-ui/user.svg user.svg
images/stroom-ui/users-disabled.svg users-disabled.svg
images/stroom-ui/users.svg users.svg
images/stroom-ui/volumes.svg volumes.svg
images/stroom-ui/warning.svg warning.svg

Pipeline element icons

Icons used for the different pipeline elements.

Base path: pipeline
Example: pipeline/stream.svg {{< stroom-icon "pipeline/stream.svg" >}}

images/stroom-ui/pipeline/ElasticIndex.svg ElasticIndex.svg
images/stroom-ui/pipeline/StroomStatsStore.svg StroomStatsStore.svg
images/stroom-ui/pipeline/analyticOutput.svg analyticOutput.svg
images/stroom-ui/pipeline/file.svg file.svg
images/stroom-ui/pipeline/files.svg files.svg
images/stroom-ui/pipeline/hadoop-elephant-logo.svg hadoop-elephant-logo.svg
images/stroom-ui/pipeline/id.svg id.svg
images/stroom-ui/pipeline/index.svg index.svg
images/stroom-ui/pipeline/json.svg json.svg
images/stroom-ui/pipeline/kafka.svg kafka.svg
images/stroom-ui/pipeline/recordCount.svg recordCount.svg
images/stroom-ui/pipeline/recordOutput.svg recordOutput.svg
images/stroom-ui/pipeline/referenceData.svg referenceData.svg
images/stroom-ui/pipeline/search.svg search.svg
images/stroom-ui/pipeline/solr.svg solr.svg
images/stroom-ui/pipeline/split.svg split.svg
images/stroom-ui/pipeline/statistics.svg statistics.svg
images/stroom-ui/pipeline/stream.svg stream.svg
images/stroom-ui/pipeline/stroomStats.svg stroomStats.svg
images/stroom-ui/pipeline/text.svg text.svg
images/stroom-ui/pipeline/xml.svg xml.svg
images/stroom-ui/pipeline/xmlSearch.svg xmlSearch.svg
images/stroom-ui/pipeline/xsd.svg xsd.svg
images/stroom-ui/pipeline/xslt.svg xslt.svg

Document type icons

Icons used for the different document entity types, i.e. those seen in the explorer tree.

Base path: document
Example: document/Index.svg {{< stroom-icon "document/Index.svg" >}}

images/stroom-ui/document/AnalyticOutputStore.svg AnalyticOutputStore.svg
images/stroom-ui/document/AnnotationsIndex.svg AnnotationsIndex.svg
images/stroom-ui/document/Dashboard.svg Dashboard.svg
images/stroom-ui/document/Dictionary.svg Dictionary.svg
images/stroom-ui/document/ElasticCluster.svg ElasticCluster.svg
images/stroom-ui/document/ElasticIndex.svg ElasticIndex.svg
images/stroom-ui/document/Feed.svg Feed.svg
images/stroom-ui/document/Folder.svg Folder.svg
images/stroom-ui/document/Index.svg Index.svg
images/stroom-ui/document/KafkaConfig.svg KafkaConfig.svg
images/stroom-ui/document/Pipeline.svg Pipeline.svg
images/stroom-ui/document/ReceiveDataRuleSet.svg ReceiveDataRuleSet.svg
images/stroom-ui/document/Script.svg Script.svg
images/stroom-ui/document/SelectAllOrNone.svg SelectAllOrNone.svg
images/stroom-ui/document/SolrIndex.svg SolrIndex.svg
images/stroom-ui/document/StatisticStore.svg StatisticStore.svg
images/stroom-ui/document/StroomStatsStore.svg StroomStatsStore.svg
images/stroom-ui/document/System.svg System.svg
images/stroom-ui/document/TextConverter.svg TextConverter.svg
images/stroom-ui/document/Visualisation.svg Visualisation.svg
images/stroom-ui/document/XMLSchema.svg XMLSchema.svg
images/stroom-ui/document/XSLT.svg XSLT.svg
images/stroom-ui/document/searchable.svg searchable.svg

Dashboard icons

Icons used on the Dashboard

Base path: dashboard.

images/stroom-ui/dashboard/expression.png expression.png
images/stroom-ui/dashboard/filter.png filter.png
images/stroom-ui/dashboard/format.png format.png
images/stroom-ui/dashboard/group.png group.png
images/stroom-ui/dashboard/sortaz.png sortaz.png
images/stroom-ui/dashboard/sortoff.png sortoff.png
images/stroom-ui/dashboard/sortza.png sortza.png

Menu items with icons that are available for use with the stroom-menu shortcode.

key.svg
API Keys
add.svg
Add
pipeline/text.svg
AnnotationWriter
monitoring.svg
Caches
password.svg
Change password
close.svg
Close
close.svg
Close All
pipeline/text.svg
CombinedParser
copy.svg
Copy
pipeline/text.svg
DSParser
document/Dashboard.svg
Dashboard
history.svg
Data Retention
volumes.svg
Data Volumes
database.svg
Database Tables
delete.svg
Delete
dependencies.svg
Dependencies
document/Dictionary.svg
Dictionary
document/ElasticIndex.svg
Elastic Cluster
document/ElasticIndex.svg
Elastic Index
pipeline/ElasticIndex.svg
ElasticIndexingFilter
download.svg
Export
document/Feed.svg
Feed
pipeline/file.svg
FileAppender
folder.svg
Folder
pipeline/hadoop-elephant-logo.svg
HDFSFileAppender
help.svg
Help
pipeline/stream.svg
HttpAppender
pipeline/id.svg
IdEnrichmentFilter
upload.svg
Import
volumes.svg
Index Volumes
pipeline/index.svg
IndexingFilter
info.svg
Info
pipeline/json.svg
JSONParser
pipeline/json.svg
JSONWriter
jobs.svg
Jobs
document/KafkaConfig.svg
Kafka Configuration
logout.svg
Logout
document/Index.svg
Lucene Index
move.svg
Move
add.svg
New
nodes.svg
Nodes
locked-amber.svg
Permissions
document/Pipeline.svg
Pipeline
settings-blue.svg
Preferences
properties.svg
Properties
pipeline/recordCount.svg
RecordCountFilter
pipeline/recordOutput.svg
RecordOutputFilter
pipeline/referenceData.svg
ReferenceDataFilter
remove.svg
Remove
edit.svg
Rename
undo.svg
Restore
pipeline/files.svg
RollingFileAppender
pipeline/stream.svg
RollingStreamAppender
document/ReceiveDataRuleSet.svg
Rule Set
save.svg
Save
save.svg
Save All
pipeline/xsd.svg
SchemaFilter
document/Script.svg
Script
pipeline/search.svg
SearchResultsOutputFilter
jobs.svg
Server Tasks
document/SolrIndex.svg
Solr Index
pipeline/solr.svg
SolrIndexingFilter
pipeline/split.svg
SplitFilter
pipeline/kafka.svg
StandardKafkaProducer
document/StatisticStore.svg
Statistic Store
pipeline/statistics.svg
StatisticsFilter
pipeline/stream.svg
StreamAppender
document/StroomStatsStore.svg
Stroom-Stats Store
pipeline/StroomStatsStore.svg
StroomStatsAppender
pipeline/stroomStats.svg
StroomStatsFilter
document/TextConverter.svg
Text Converter
pipeline/text.svg
TextWriter
user.svg
User Permissions
users.svg
Users
document/Visualisation.svg
Visualisation
document/XMLSchema.svg
XML Schema
pipeline/xml.svg
XMLFragmentParser
pipeline/xml.svg
XMLParser
pipeline/xml.svg
XMLWriter
pipeline/xmlSearch.svg
XPathExtractionOutputFilter
document/XSLT.svg
XSL Translation
pipeline/xslt.svg
XSLTFilter

Pipeline elements

Pipeline elements that are available for use with the pipe-elm and pipe shortcodes.

Icons

This gallery of icons can be updated by running the following script which will copy all the icons from the stroom repository. You should ensure your local stroom repository is up to date and on the correct branch before running this.

./update_stroom_icons.sh <stroom repo root>

e.g.

./update_stroom_icons.sh ../v7stroom/

To update the available menu items edit the shortcode file layouts/shortcodes/stroom-menu.html and modify the icon_map variable.

Pipeline elements

To update the available pipeline elements edit the shortcode file layouts/shortcodes/pipe-elm.html and modify the element_map variable.